SF-QFN8F-L-02 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

3.92mm [0.154"]
0.80mm [0.031"]
3.12mm
[0.123"]
1234
GND
8765
3.50mm
3
[0.138"]
0.80mm [0.032"] typ.
Top View
4.50mm [0.177"]
4
1
2.10mm 2.50mm
[0.083"] [0.098"]
5
8
3.63mm [0.143"]
Bottom View
3.02mm
[0.119"]
0.30mm [0.012"] typ.
2
1
0.80mm [0.031"] typ.
Front View
RoHS COMPLIANT
1 ^{Substrate: 0.635mm ±0.18mm [0.025" ±0.007"]}
per IPC 4101/21, Gold surface finish.
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
2 ^{FR4/G10 or equivalent high temp material.}
Non-clad.
Pins: shell material- Brass Alloy 360 1/2 hard;
3 ^{finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni}
(min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Description: 8 position MLF surface mount foot
8 position (+1 Gnd index pin). 1.0mm pitch UGA female receptacles (top) to 8 position, 0.8mm MLF pattern
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-QFN8F-L-02 Drawing
Status: Released
Scale: 8:1
Rev: A
© 2005 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Drawing: H. Hansen
File: SF-QFN8F-L-02 Dwg
Date: 11/23/05
Modified: