SF-QFN16A-A-02B Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

3.92mm
[0.154"]
2.40mm [0.094"]
1
1
1
1
6
5
4
2
2
1
1
3
1
1
3
5
9
1
0
4
6
7
8
0.80mm typ.
3.00mm
[0.118"]
2.40mm
[0.094"]
3.00mm [0.118"]
0.50mm typ.
[0.020"]
16
1
2.20mm [0.087"]
3
3.92mm [0.154"]
Top View
1.63mm sq.
[0.064"]
2.20mm [0.087"]
Bottom View
2
RoHS COMPLIANT
3.30mm
[0.130"]
1
Side View
1
Substrate: 0.79mm ±0.18mm [0.031" ±0.007"]
per IPC 4101/21, Gold surface finish.
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
2 FR4/G10 or equivalent high temp material.
Non-clad.
Pins: shell material- Brass Alloy 360 1/2 hard;
3 finish- 0.25µm [10µ"] Au over 1.27µm [50µ"]
Ni (min.). Contact material- BeCu; finish
0.25µm [10µ"] Au over 2.54µm [100µ"] Ni
(min. ).
Description: 16 position MLF surface mount foot
16 position (Center pad is a no connect), 0.8mm pitch UGA female receptacles (top) to 16
position, 0.5mm MLF pattern
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-QFN16A-A-02B Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: J. Glab
File: SF-QFN16A-A-02B Dwg
Scale: 12:1
Rev: B
Date: 06/28/07
Modified: 7/2/07