SF-QFN132A-A-01 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Primary dimension units are millimeters

PROPRIETARY AND CONFIDENTIAL - THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF IRONWOOD ELECTRONICS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF IRONWOOD ELECTRONICS, INC. IS PROHIBITED.
PIN 1 ORIENTATION
0.80
11.254
TOP VIEW
10.00
0.80
100
99
67
SIDE VIEW
66
0.40 (x132)
0.254 (x132)
BOTTOM VIEW
8.00
132
1
0.25
33
0.65
34
4.65
8.00
0.50
0.50
ISO VIEW
Substrate: High Temp FR4 NON-CLAD
3.02±0.50
Solder alloy: Sn96.5Ag3.0Cu0.5
Substrate: 0.4572mm ±0.18mm
per IPC 4101/21, Gold surface finish.
FRONT VIEW
Description: 132 pin 0.5mm pitch QFN SMT foot.
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-QFN132A-A-01 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 0.61
Shell: Brass Alloy 360; 0.25µm [10µ”]
Au over 2.54 µm [100µ”] Ni finish
Contact: BeCu Alloy 172; 0.25µm
[10µ”] Au over 1.27 µm [50µ”] Ni
finish.
STATUS: Released
ENG: S. Faiz
FILE: SF-QFN132A-A-01 Dwg
SHEET: 1 OF 1
DRAWN BY: M. Raske
DATE: 06/25/2014
REV. A
SCALE: 6:1