SF-PLCC44-J-05 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

Top View
17.01mm
[0.670"]
Pin 1
40
7
17.02mm
[0.670"]
2
40
7
1
29
18
29
18
Side View
0.55mm
[0.022"]
1.27mm typ. [0.050"]
0.46mm dia. typ. [0.018"]
2
1
6.89mm
[0.271"]
1.27mm typ. [0.050"]
3
17.42mm
[0.686"]
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
1 FR4/G10 or equivalent high temp material. 17µm [1/2
oz.] Cu clad. SnPb plating.
Pins: material- Brass Alloy 360 1/2 hard; finish-
2 _{0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).}
Description: Surface Mount PLCC emulator foot (low profile)
44 male terminal pins to PLCC surface mount lead pattern.
3
Leads: material- BeCu Alloy 194; plating- 60/40
SnPb 3.80-10.16µm [150-400µ"].
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without
notice.
SF-PLCC44-J-05 Dwg
Status: Released
Scale: 4:1
Rev: C
© 1995 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Drawing: C. Hautman
File: SF-PLCC44-J-05 Dwg
Date:6/13/95
Modified: 9/27/00