SF-MLF8D-K-01F Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

Top View
8765
765
8
4
123
1mm typ.
1234
RoHS COMPLIANT
Ø 0.36mm [Ø 0.014"] typ.
3.75mm
[0.148"]
2
5.33mm
[0.210"]
1
Side View
0.8mm typ.
1234
0.5mm
[0.020"]
End View
4mm sqr.
[0.157"]
3
Bottom View
8765
0.35mm [0.014"]
1
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
per IPC 4101/21, silver surface finish.
2
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
3 Tape: material- kapton.
Description: MLF Surface Mount Foot (Bottom Termination)
8 position terminal pins to 8 position SMT pads.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-MLF8D-K-01F Drawing
© 2005 IRONWOOD ELECTRONICS, INC.
PO BOX21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SF-MLF8D-K-01F Dwg
Scale: 10:1
Rev: A
Date: 10/26/05
Modified: