SF-MLF8C-A-02 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

3.00mm [0.118"]
0.50mm [0.020"]
3.00mm [0.118"]
5
8
0.65mm typ.
7
0.50mm
[0.020"]
8
3.00mm
[0.118"]
1
Top View
6
5
4
2
3
3
1.00mm typ.
3.00mm
[0.118"]
1.75mm
[0.069"]
Gnd/index
pin
4
Bottom View
1.09mm
[0.043"]
1
1.09mm [0.043"]
2
3.47mm
[0.137"]
Side View
1
Substrate: 0.79mm ±0.18mm [0.031" ±0.007"]
1 FR4/G10 or equivalent high temp material. Non-clad.
2
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
FR4/G10 or equivalent high temp material. Non-clad.
Pins: shell material- Brass Alloy 360 1/2 hard;
3 _{finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni}
(min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Description: 8 position MLF surface mount foot
8 position (+1 Gnd index pin). 1.0mm pitch UGA female receptacles (top) to 8 position, 0.65mm MLF pattern
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-MLF8C-A-02 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SF-MLF8C-A-02 Dwg
Scale: 12:1
Rev: A
Date: 11/29/04
Modified: