SF-MLF64A-A-02 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

9.25mm [0.364"]
0.63mm [0.025"]
1 63 61 59 57 55 53 51 49
3 64 62 60 56 54 50 48 47
0.63mm
[0.025"] ^{5 2}
58
7 64
52
46 45
1.00mm typ.
44 42 43
9.25mm
[0.364"]
98
40 41
11 10 12
36 38 39
13 14
20
26
34 37
15 16 18 22 24 28 30 32 35
17 19 21 23 25 27 29 31 33
Top View
3
Gnd/index
pin
0.50mm typ.
64
1
6.55mm 9.00mm
[0.258"] [0.354"]
6.55mm [0.258"]
9.00mm [0.354"]
Bottom View
3.49mm
[0.138"]
Side View
2
1
Substrate: 0.79mm ±0.18mm [0.031" ±0.007"]
1
FR4/G10 or equivalent high temp material. 17µm
[1/2 oz.] Cu clad. SnPb plating.
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
2 _{FR4/G10 or equivalent high temp material. Non-clad.}
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
3 _{(min.). Contact material- BeCu; finish 0.25µm}
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Description: 64 postiom MLF surface mount foot
64 position (+1 Gnd index pin), 1.0mm pitch UGA female receptacles (top) to 64 position, 0.5mm MLF pattern.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-MLF64A-A-02 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SF-MLF64A-A-02 Dwg
Scale: 6:1
Rev: A
Date: 8/5/04
Modified: