SF-MLF48A-A-02 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice.

7.25mm [0.286"]
0.83mm [0.033"]
0.83mm
[0.033"]
7.25mm
[0.286"]
1 47 45 43 42 40 38 37
2 48 46 44 41 39 36 35
43
34 33
65
32 31
78
29 30
9 10
27 28
11 12 15 17 20 22 24 26
13 14 16 18 19 21 23 25
0.80mm typ.
Gnd/index
pin
Top View
3
Bottom View
0.50mm typ.
48
1
7.00mm
[0.276"]
4.39mm [0.173"]
6.24mm [0.246"]
2
3.30mm
[0.130"]
Side View
1
Substrate: 0.79mm ±0.18mm [0.031" ±0.007"]
1 FR4/G10 or equivalent high temp material. Non-clad.
2 ^{Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]}
FR4/G10 or equivalent high temp material. Non-clad.
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
3 (min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Description: 48 position MLF surface mount foot
48 position (+1 Gnd index pin). 0.8mm pitch UGA female receptacles (top) to 48 position, 0.5mm MLF pattern
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-MLF48A-A-02 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SF-MLF48A-A-02 Dwg
Scale: 8:1
Rev: B
Date: 6/11/04
Modified: 9/28/04