SF-MLF32A-A-02 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

0.63mm
[0.025"]
5.25mm
[0.207"]
Top View
5.25mm [0.207"]
0.63mm [0.025"]
1 31 29 28 26 24
2 32 30 27 25 23
43
22 21
56
19 20
7 9 11 14 16 18
8 10 12 13 15 17
0.80mm typ.
Gnd/index
pin
3
Bottom View
0.50mm typ.
32
2.65mm [0.104"]
4.20mm [0.165"]
1
5.00mm
[0.197"]
2
3.30mm
[0.130"]
Side View
1
Substrate: 0.79mm ±0.18mm [0.031" ±0.007"]
1
FR4/G10 or equivalent high temp material. 17µm
[1/2 oz.] Cu clad. SnPb plating.
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
2 _{FR4/G10 or equivalent high temp material. Non-clad.}
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
3 _{(min.). Contact material- BeCu; finish 0.25µm}
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Description: 32 postiom MLF surface mount foot
32 position (+1 Gnd index pin), 0.8mm pitch UGA female receptacles (top) to 32 position, 0.5mm MLF pattern
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-MLF32A-A-02 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SF-MLF32A-A-02 Dwg
Scale: 10:1
Rev: B
Date: 6/11/04
Modified: 9/28/04