SF-MLF20A-A-02F Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

4.72mm [0.186"]
3.20mm [0.126"]
3.20mm
[0.126"]
4.72mm
[0.186"]
2
1
1
1
1
0
9
8
7
5
2
1
1
1
6
4
3
1
3
4
6
1
1
1
2
5
7
8
9
1
0
3
Top View
0.80mm typ.
4.00mm
[0.157"]
Gnd/index
pin
4.00mm [0.157"]
0.50mm typ. [0.020"]
20
2
1
1
1
1
0
9
8
7
5
2
1
3
4
6
1
11
6
4
2.13mm
1
[0.084"]
3
2.75mm
1
1
[0.108"]
1
2
5
7
8
9
1
0
2.13mm [0.084"]
2.75mm [0.108"]
Bottom View
3.30mm
[0.130"]
Side View
2
RoHS COMPLIANT
1 ^{Substrate: 0.79mm ±0.18mm [0.031" ±0.007"] per}
IPC 4101/21, Gold surface finish.
1
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
2 _{FR4/G10 or equivalent high temp material.}
Non-clad.
Pins: shell material- Brass Alloy 360 1/2 hard;
3 _{finish- 0.25µm [10µ"] Au over 1.27µm [50µ"]}
Ni (min.). Contact material- BeCu; finish
0.25µm [10µ"] Au over 2.54µm [100µ"] Ni
(min. ).
Description: 20 position MLF surface mount foot
20 position (+1 Gnd index pin). 0.8mm pitch UGA female receptacles (top) to 20 position, 0.5mm MLF pattern.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-MLF20A-A-02F Drawing
© 2005 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: J Cramer
File: SF-MLF20A-A-02F Dwg
Scale: 12:1
Rev: B
Date: 5/13/06
Modified: 9/17/07