SF-MLF16A-A-02 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

4.72mm [0.186"]
3.20mm [0.126"]
Gnd/index
pin
4.72mm
[0.186"]
3.92mm
[0.154"]
16 15 14 12
2
1 13 11
3
5
9 10
4
6
7
8
0.80mm typ.
3.00mm
3.20mm [0.118"]
[0.126"]
3
3.92mm [0.154"]
Top View
3.00mm [0.118"]
0.50mm typ.
[0.020"]
16
1
1.63mm
[0.064"]
2.20mm
[0.087"]
1.63mm
[0.064"]
2.20mm [0.087"]
Bottom View
2
3.30mm
[0.130"]
Substrate: 0.79mm ±0.18mm [0.031" ±0.007"]
1 FR4/G10 or equivalent high temp material. Non-clad.
1
2
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
FR4/G10 or equivalent high temp material. Non-clad.
Side View
Pins: shell material- Brass Alloy 360 1/2 hard;
3 _{finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni}
(min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Description: 16 position MLF surface mount foot
16 position (+1 Gnd index pin). 0.8mm pitch UGA female receptacles (top) to 16 position, 0.5mm MLF pattern
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-MLF16A-A-02 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: SF-MLF16A-A-02 Dwg
Scale: 12:1
Rev: A
Date: 11/29/04
Modified: