SF-BGA548C-B-61 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Primary dimension units are millimeters

PROPRIETARY AND CONFIDENTIAL - THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF IRONWOOD ELECTRONICS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF IRONWOOD ELECTRONICS, INC. IS PROHIBITED.
Orientation Mark
23.00
0.80 typ
0.2032
4.55
0.36±0.05
Description: SF-BGA548C-B-61
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0254mm [±0.001"],
substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"]
unless stated otherwise. Materials and specifications are subject to change without notice.
SF-BGA548C-B-61 Specification
SF-BGA548C-B-61F Specification
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 2.80
2
1
3
PART
NO
1
2
3
DESCRIPTION
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
FR4/G10 or equivalent high temp material;
Non-clad
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25μm [10μ"] Au over 1.27μm [50μ"] Ni (min.).
Solder Balls: Sn96.5Ag3.0Cu0.5
PART NO.
SUFFIX
SOLDER BALL ALLOY
-61
-61F*
Sn63Pb37
Sn96.5Ag3.0Cu0.5
*RoHS Compliant
Rev
Date
Initials Description
B 07/02/14 MR P-T144A was P-T123A
C
1/9/15
MT
Converted to SW. Combined -61 and
-61F parts.
STATUS: Released
ENG: M. Tully
FILE: SF-BGA548C-B-61 Dwg
SHEET: 1 OF 1
DRAWN BY: M. Raske
DATE: 09/03/2014
REV. C
SCALE: 3:1