SF-BGA304A-B-32F Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

Patent Pending
31.00mm [1.220"]
1.53mm [0.060"]
Top View
1.53mm
[0.060"]
31.00mm
[1.220"]
1.33mm
[0.052"]
2.37mm
[0.093"]
Detail A
1.27mm
[0.050"] typ.
3
2
3.03mm
[0.119"]
1
Detail A
0.66mm
[0.026"]
Side View
4
RoH S
COM
Ø 0.76mm typ. [Ø 0.030"]
P L IA N T
1
2
CONTACT DATA
Accepts 0.20mm - 0.33mm Diameter pins
3-finger
3
37/25 gram, Initial insertion force (with 0.254mm/0.203mm dia. pin)
30/22 gram, normal force (with 0.254mm/0.203mm dia. pin)
4
20/17 gram, extraction force (with 0.254mm0.203mm dia. pin)
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
FR4/G10 or equivalent high temp material. (RoHS)
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
Contacts: Beryllium Copper Alloy172, HT; Finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
Solder Balls Sn96.5Ag3.0Cu0.5 alloy
Description: Giga-snaP BGA SMT Foot
304 position (1.27mm pitch) gold plated female receptacle pins to SMT solder balls (BGA type). Pin asignment 1:1.
Tolerances: diameters ±0.03mm [±0.001"], PCB perimeters ±0.18mm [±0.007"], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-BGA304A-B-32F Drawing
Status: Released
Scale: 4:1
Rev: A
© 2006 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Drawing: H. Hansen
File: SG-BGA304A-B-32F Dwg
Date: 8/24/06
Modified: