SBT-BGA-6019 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – High speed, reliable SBT Pin connection

SBT BGA Socket - Direct mount, solderless
45.00mm
Recommended torque is
1 in lb per screw
3
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable SBT Pin connection
Minimum real estate required
Compression plate distributes forces evenly
Easily removable swivel socket lid
A
Top View:
(fan removed)
1
45.00mm
Fan is not shown
A
Remove fan prior to
Applying torque to
Heat sink / compression
plate
11
Side View
(Section AA)
10
9
5
7
2
4
Customer's Target PCB
8
6
Customer's
BGA IC
SBT-BGA-6019 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Scale: -
Rev: A
Drawing: E Smolentseva
Date: 09/08/2012
File: SBT-BGA-6019 Dwg.mcd ^Modified:
1 Socket Lid/ Heat sink: Ni plated Aluminum.
2
Socket base: Ni plated Aluminum.
Thickness = 5mm.
3
Compression screw: Socket head cap, alloy steel with
black oxide finish, 0-80 fine thread , 7.94mm long.
SBT pin: Stamped contact BeCu, Au plated
4
Spring: SS, Au plated
5 ^{Pin Guide: Ceramic Filled Peek}
Socket base screw: Socket head cap, alloy steel with
6 _{black oxide finish, 0-80 fine thread , 15.875mm long.}
Backing Plate: Ni plated Aluminum.
7 Thickness = 4mm.
8 ^{Insulation Plate: FR4, Thickness = 1.59mm.}
9 IC Frame: Ultem
10 ^{Gap Pad}
11 Fan: 40x40x10mm
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4