LS-MLF32A-01 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Materials and specifications are subject to change without notice

5.25mm [0.207"]
0.50mm typ.
5.25mm
[0.207"]
2.65mm
[0.104"]
4.20mm 5.00mm
[0.165"] [0.197"]
Top View
0.24mm
[0.009"]
2.65mm [0.104"]
4.20mm [0.165"]
5.00mm [0.197"]
1
2
4.56mm
[0.180"]
2.81mm
[0.111"]
3
Side View
Ø 0.20mm typ. [0.008"]
0.80mm typ.
Substrate: 0.79mm ±0.18mm [0.031" ±0.007"]
1
FR4/G10 or equivalent high temp material. 17µm
[1/2 oz.] Cu clad. SnPb plating.
Substrate: 1.59mm ±0.18mm [0.062" ±0.007"]
2 _{FR4/G10 or equivalent high temp material. Non-clad.}
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
3 (min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Description: 32 postiom MLF land socket
32 position (+1 Gnd index pin)0.5mm MLF pattern to 0.8mm pitch UGA male pins.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
LS-MLF32A-01 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Drawing: H. Hansen
File: LS-MLF32A-01 Dwg
Scale: 10:1
Rev: A
Date: 11/10/04
Modified: