CG-BGA-4002 Datasheet, PDF (1/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Top View
49.225mm
A
[1.938"]
Features
Directly mounts to target PCB (needs tooling
holes) with hardware
Minimum real estate required
Compression plate distributes forces evenly
Clamshell lid
A
42.60mm
10
[1.677"]
Side View
(Section AA)
Assembled 38mm
+ IC thickness
Customer's PCB
7
CG-BGA-4002 Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
4
1
3
2
6
5
9
8
Status: Released
Drawing: Umer Qureshi
File: CG-BGA-4002 Dwg
Materials:
1
Clam Shell Lid: Black anodized 7075 Aluminum.
Height = 20 mm.
Socket Base: Black anodized 7075 Aluminum.
2 Height = 6 mm.
Compression Plate: Black anodized 7075
3 ^Aluminum.
Thickness = 12 mm.
Compression Screw: Clear anodized 7075
4 ^Aluminum.
Height = 27 mm, Fluted Knob
Elastomer: 40 micron dia gold plated brass
5
filaments arranged symmetrically in a
silicone rubber (63.5 degree angle).
Thickness = 0.75mm.
6
Elastomer Guide: Non-clad FR4.
Thickness = 0.75mm.
Socket Base Screw: Socket Head Cap Screw,
7 alloy steel with black oxide finish, 0-80 Thread,
5/8" long.
8 ^{Backing Plate: Black anodized 7075 Aluminum}
9 ^{Insulation Plate: FR4/G10}
10 ^{Latch: Black anodized 7075 Aluminum.}
Scale: -
Rev: A
Date: 10/30/07
Modified:
All Tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
PAGE 1 of 4