CA-QFE32SA-L-Z-T-02F Datasheet, PDF (1/1 Pages) Ironwood Electronics. – Carrier Adaptor (CA) 32 position QFP ZIF socket (mini-grid on 0.040" centers) to 32 position QFP surface-mountable leadless foot with test points.

TOP VIEW
58.42mm [2.300"]
1.27mm [0.050"]
1.27mm
[0.050"]
21
45.72mm
[1.800"]
87
32
26
31
25
Pin 1
6.50mm [0.256"]
9
15
10
16
43.94mm [1.730"]
7.00mm
[0.276"]
23 24
17 18
32.51mm
[1.280"]
1
5
SIDE VIEW
30.48mm
[1.200"] Assembled
4
2
21.26mm
[0.837"]
3
0.8mm typ. [0.032"]
5.3mm [0.210"]
1
3.19mm
[0.126"]
8.0mm [0.315"]
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
1 _{per IPC 4101/21, gold surface finish.}
RoHS COMPLIANT
Description: Carrier Adaptor (CA)
32 position QFP ZIF socket (mini-grid on 0.040" centers)
to 32 position QFP surface-mountable leadless foot with test points.
Substrate: 3.18mm ±0.18mm [0.125" ±0.007"]
2 FR4/G10 or equivalent high temp material.
Non-clad.
3
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"]
4 _{Ni (min.). Contact material- BeCu; finish}
0.25µm [10µ"] Au over 2.54µm [100µ"] Ni
(min. ).
Test points: material- Phosphor Bronze; plating-
5 _{Sn over 1.27µm [50µ"] Ni. Gold flash on contact}
end.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
CA-QFE32SA-L-Z-T-02F Drawing
© 2007 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: [phone]
www.ironwoodelectronics.com
Status: Released
Scale: 1.5:1
Rev: A
Drawing: H. Hansen
Date: 1/8/06
File: CA-QFE32SA-L-Z-T-02F Dwg
Modified: