CA-PLCC084-Z-P-T-01 Datasheet, PDF (1/1 Pages) Ironwood Electronics. – CARRIER ADAPTOR 84 position PLCC ZIF socket with test points to 84 position PLCC plug.

53.34mm
[2.100"]
Top View
53.34mm
[2.100"]
26.64mm
[1.049"]
34.44mm[1.356"] assembled
Side View
6
1
4
3
5
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
1 FR4/G10 or equivalent high temp material. 17µm [1/2
oz.] Cu clad. SnPb plating.
Substrate: 3.18mm ±0.18mm [0.125" ±0.007"]
2 _{FR4/G10 or equivalent high temp material. Non-clad.}
Pins: material- Brass Alloy 360 1/2 hard; finish-
3 _{0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).}
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
4 _{(min.). Contact material- BeCu; finish 0.25µm}
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Leads: material- BeCu Alloy 194; plating- 60/40
5 _{SnPb 3.80-10.16µm [150-400µ"].}
6
Test points: material- Phosphor Bronze; plating- Sn
over 1.27µm [50µ"] Ni. Gold flash on contact end.
Description: CARRIER ADAPTOR
84 position PLCC ZIF socket with test points to 84 position PLCC plug.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise.
CA-PLCC084-Z-P-T-01 Dwg
Status: Released
Scale: 4:3
Rev: D
© 1993 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: [phone]
www.ironwoodelectronics.com
Drawing: 6/10/93
FileCA-PLCC084-Z-P-T-01 Dwg
Date: 9/30/96
Modified:3/31/00