MAH1000503R30812Q_15 Datasheet, PDF (7/20 Pages) International Rectifier – 100V Input, Quad Output

MAH1000503R30812Q
(100V Input, Quad Output)
Model Definition and Test Plans
Model Definition
Model
Description
Build Standard
EBB
The EBB is an electrical
representative model.
The EBB is intended to be
used by customers in their
proto type at equipment level.
EBB models are built at IR’s
Danish Design Center.
The PCB will be had soldered by the engineering group (certified
operator). No staking and conformal coating is foreseen.
Preferably same type of EEE parts as intended for flight, but lower grade
will be used for convenience. For resistors and capacitors different
types with same basic characteristics may be used
EQM
The EQM is an electrical and
mechanical representative
model.
The EQM is intended to be
used by customer in their EQM
at equipment level.
Flight standard for processes.
Same type of EEE parts as intended for flight, but lower grade may be
used for convenience.
FM
Flight standard models.
Full flight standard
Test Plan - EBB
The EBB must pass the following tests:
Test No. Type of Test
Location* Remarks
1
Electrical performance test,
IRD
room temperature incl. Limited
EMC test (CE 50kHz-1MHz)
Acceptance Test Procedure
2
Electrical performance test in IRD
temperature (Q-level)
Acceptance Test Procedure
3
Electrical performance test,
IRD
room temperature incl. Limited
EMC test (CE 50kHz-1MHz)
Acceptance Test Procedure
4
Final Inspection
IRD
General inspection Procedure
www.irf.com
7