AUIRS2191S Datasheet, PDF (6/19 Pages) International Rectifier – High power DC-DC SMPS converters

AUIRS2191S
Static Electrical Characteristics
Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤ 125°C with bias
conditions of V_BIAS (VCC or VBS) = 15V. The VIN, VTH parameters are referenced to VSS and are applicable to all logic input leads:
HIN and LIN. The VO parameters are referenced to COM and are applicable to the respective output leads: HO or LO.
Symbol
Definition
V_IH
V_IL
V_{OH 2mA}
V_{OH 20mA}
V_OL
I_LK
I_QBS
I_QCC
Logic “1” input voltage
Logic “0” input voltage
High level output voltage, V_BIAS-V_O
High level output voltage, V_BIAS-V_O
Low level output voltage, V_O
Offset supply leakage current
Quiescent V_BS supply current
Quiescent V_CC supply current
I_QBS18 Quiescent V_BS supply current
Min Typ Max Unit
s
2.5 ---
---
--- ---
--- ---
0.8
2.5 ^V
--- --- 3.3
--- --- 0.1
--- ---
50
--- 100 200
--- 150 300
--- 180 300
I_QCC18 Quiescent V_CC supply current
I_QBS20 Quiescent V_BS supply current
--- 300 450 _µA
--- 850 1500
I_QCC20 Quiescent V_CC supply current
--- 1500 2500
I_IN+ Logic “1” input bias current
--- 3.5
7
I_IN-
Logic “0” input bias current
--- --- 1.0
V_BSUV+ V_BS supply undervoltage positive going threshold 8.0 8.9 9.8
V_BSUV- V_BS supply undervoltage negative going threshold 7.4 8.2 8.8
V_BSUVHYS V_BS supply undervoltage hysteresis
0.3 0.7
V_CCUV+ V_CC supply undervoltage positive going threshold 8.0 8.9
---
9.8
V
V_CCUV- V_CC supply undervoltage negative going threshold 7.4 8.2 9.0
V_CCUVHYS V_CC supply undervoltage hysteresis
0.3 0.7 ---
I_O+
Output high short circuit pulsed current ^(†)
I_O-
Output low short circuit pulsed current^(†)
2.6 3.5 ---
A
2.6 3.5 ---
I_O+
Output high short circuit pulsed current ^(†)
I_O-
Output low short circuit pulsed current^(†)
(†) _{Guaranteed by design}
1.8 3.5 --- A
1.8 3.5 ---
Test Conditions
V_CC = 9.8V – 20V
I_o= 2 mA
I_o= 20 mA
I_o= 2 mA
V_B = V_S = 600 V
V_IN = 0V or 3.3V
V_IN = 0V or 3.3V
V_IN = 0V or 3.3V
V_BS=18V
V_IN = 0V or 3.3V
V_CC=18V
V_IN = 0V or 3.3V
V_BS=20V
V_IN = 0V or 3.3V
V_CC=20V
V_IN = 3.3V
V_IN = 0V
V_O = 0 V,
PW ≤ 10 μs,
Tj = 25°C
V_O = 15 V,
PW ≤ 10 μs
Tj = 25°C
V_O = 0 V,
PW ≤ 10 μs,
V_O = 15 V,
PW ≤ 10 μs
Dynamic Electrical Characteristics
Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤125°C with bias
conditions of V_BIAS (VCC, VBS) = 15V, CL = 1000 pF. The dynamic electrical characteristics are measured using the test definitions
shown in Figure 3.
Symbol
t_ON
t_OFF
t_R
t_F
MT
Definition
Turn-on propagation delay
Turn-off propagation delay
Turn-on rise time
Turn-off fall time
Delay matching, HS & LS turn-on/off
Min Typ Max Units
50 90 175
50 90 175
5
15 60
ns
5
15 60
---
---
25
6 www.irf.com © 2012 International Rectifier
Test Conditions
V_S = 0V
V_S = 0V or 600V
February 3, 2013