AUIPS2031R Datasheet, PDF (3/14 Pages) International Rectifier – INTELLIGENT POWER LOW SIDE SWITCH

AUIPS2031R
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. (Tj= -40°C..150°C,
Vcc=6..50V unless otherwise specified).
Symbol Parameter
Min. Max. Units
Vds
Maximum drain to source voltage
-0.3 60
V
Vin
Maximum input voltage
-0.3
6
V
Isd cont.
Max diode continuous current (limited by thermal dissipation) Rth=50°C/W

2.5
A
Pd
Maximum power dissipation (internally limited by thermal protection)
Rth=50C°/W

2.5
W
Tj max.
Maximum operating junction temperature
Maximum storage temperature
-40 150
-55 150
°C
Thermal Characteristics
Symbol
Parameter
Rth1
Thermal resistance junction to ambient IPS2031R D-Pak std. footprint
Rth2
Thermal resistance junction to ambient IPS2031R D-Pak 1” sqr. footprint
Rth3
Thermal resistance junction to case IPS2031R D-Pak
Typ.
70
50
2.5
Max.



Units
°C/W
Recommended Operating Conditions
These values are given for a quick design. For operation outside these conditions, please consult the application notes.
Symbol
Parameter
Min. Max. Units
VIH
High level input voltage
4
5.5
VIL
Low level input voltage
0
0.5
Ids
Continuous drain current, Tambient=85°C, Tj=125°C, Vin=5V,Rth=70°C/W 
2.3
A
Rin
Recommended resistor in series with IN pin Input signal voltage=5V (1) 0.5 1.5
Input signal voltage=4V (1) 0.5
1
kΩ
Max. t rise
Max. input signal rising time (from 10% to 90%)(2)

0.5
µs
(1) Input signal of the pulse generator not the voltage on the IN pin of the device. Do not connect any other component on
the input.
(2) Max. t rise is for the input signal of the pulse generator not on the IN pin voltage of the device
3 www.irf.com
© 2013 International Rectifier
April 25, 2013