104MT Datasheet, PDF (3/10 Pages) International Rectifier – THREE PHASE AC SWITCH

54-94-104MT..KB Series
Bulletin I27504 08/97
Blocking
Parameter
54MT.KB 94MT.KB 104MT.KB Units Conditions
V_INS RMS isolation voltage
4000
V T_J = 25^oC all terminal shorted
f = 50Hz, t = 1s
dv/dt Max. critical rate of rise
of off-state voltage (*)
500
V/µs T_J = T_J max., linear to 0.67 V_DRM,
gate open circuit
(*) Available with dv/dt = 1000V/µs, to complete code add S90 i.e. 104MT160KBS90.
Triggering
Parameter
P_GM Max. peak gate power
P_G(AV) Max. average gate power
I_GM Max. peak gate current
-V Max. peak negative
GT
gate voltage
V_GT Max. required DC gate
voltage to trigger
I
Max. required DC gate
GT
current to trigger
V Max. gate voltage
GD
that will not trigger
I
Max. gate current
GD
that will not trigger
54MT.KB 94MT.KB 104MT.KB Units Conditions
10
W T_J = T_J max.
2.5
2.5
A
10
V
4.0
2.5
1.7
270
150
80
0.25
6
V T_J = - 40°C Anodesupply=6V,resistiveload
T_J = 25°C
T_J = 125°C
T_J = - 40°C Anodesupply=6V,resistiveload
mA T_J = 25°C
T_J = 125°C
V @ T = T max., ratedV applied
JJ
DRM
mA
Thermal and Mechanical Specifications
Parameter
54MT.KB 94MT.KB 104MT.KB Units Conditions
T_J Max. junction operating
temperature range
T_stg Max. storage temperature
range
-40 to 125
°C
-40 to 125
°C
R_thJC Max. thermal resistance,
junction to case
R_thCS Max. thermal resistance,
case to heatsink
T Mounting
to heatsink
torque ± 10%
to terminal
wt Approximate weight
0.52
1.05
0.56
1.12
0.39
0.77
0.40
0.80
0.03
4 to 6
3 to 4
225
0.34
0.69
0.36
0.72
K/W DC operation per single AC switch
DC operation per junction
180° Sine cond. angle per single AC switch
180° Sine cond. angle per junction
K/W
Nm
g
Per module
Mounting surface smooth, flat and greased
A mounting compound is recommended and the
torque should be rechecked after a period of 3
hours to allow for the spread of the compound.
Lubricated threads.
www.irf.com
3