100MT160PA Datasheet, PDF (3/8 Pages) International Rectifier – THREE PHASE BRIDGE

MTP 3-Phase Rectifier Series
Bulletin I27145 rev. B 06/02
Thermal and Mechanical Specifications
Parameter
40MT 70MT 100MT
T_J
Maximum junction operating
temperature range
- 40 to 150
T_stg
R_thJC
Maximum storage temperature
range
Maximum thermal resistance,
junction to case
R_thCS
T
wt
Maximum thermal resistance,
case to heatsink
Mounting torque ± 10%
to heatsink
Approximate weight
0.27
1.6
0.38
2.25
-40 to 125
0.23
1.38
0.29
1.76
0.1
0.19
1.14
0.22
1.29
4
65
Units Conditions
°C
°C
K/W
K/W
Nm
g
DC operation per module
DC operation per junction
120° Rect condunction angle per module
120° Rect condunction angle per junction
Per module.
Mounting surface smooth, flat and greased.
Heatsink compound thermal conductivity = 0.42W/mK
A mounting compound is recommended and the
torque should be rechecked after a period of 3
hours to allow for the spread of the compound.
Lubricated threads.
Clearance and Creepage Distances
Parameter
Clearance (external shortest distance in air between terminals which
are not internally short circuited together)
Creepage distance (shortest distance along external surface of the
insulating material between terminals which are not internally short
circuited together)
MT...PA
10.9
10.9
MT...PB
12.3
12.3
Ordering Information Table
Device Code
10 0 MT 160 P B
Units
mm
mm
1
2
3
4
5
1 - Current rating code
4 = 45A
7 = 75A
10 = 100A
2 - Circuit configuration code: 0 = 3-Phase Rectifier Bridge
3 - Essential part number
4 - Voltage code: code x 10 = V_RRM (See Voltage Ratings table)
5 - Pinout code:
A = Flat pins
B = Round pins
www.irf.com
3