IRS26310DJPBF_15 Datasheet, PDF (20/44 Pages) International Rectifier – HIGH VOLTAGE 3 PHASE GATE DRIVER IC WITH DC BUS OVER –VOLTAGE PROTECTION

IRS26310DJPbF
Figure 9: Illustration of shoot-through protection circuitry
IRS26310DJ
HIN LIN HO LO
0
0
0
0
0
1
0
1
1
0
1
0
1
1
0
0
Table 1: Input/output truth table
Enable Input
The IRS26310D is equipped with an enable input pin that is used to shutdown or enable the HVIC. When the EN pin
is in the high state the HVIC is able to operate normally (assuming no other fault conditions). When a condition
occurs that should shutdown the HVIC, the EN pin should see a low logic state. The enable circuitry of the
IRS26310D features an input filter; the minimum input duration is specified by t_FILTER,EN. Please refer to the EN pin
parameters V_EN,TH+, V_EN,TH-, and I_EN for the details of its use. Table 2 gives a summary of this pin’s functionality and
Figure 10 illustrates the outputs’ response to a shutdown command.
Enable Input
Enable input high Outputs enabled^*
Enable input low Outputs disabled
Table 2: Enable functionality truth table
(*assumes no other fault condition)
www.irf.com
© 2008 International Rectifier
20