SD3553C Datasheet, PDF (2/4 Pages) International Rectifier – FAST RECOVERY DIODES

SD3553C..S20R Series
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Type number
Voltage
Code
V_RRM , maximum repetitive
peak reverse voltage
V
16
1600
SD3553C..S20R
20
2000
25
2500
V_RSM , maximum non-
repetitive peak rev. voltage
V
1700
2100
2600
I_RRM max.
@ T_J = 150°c
mA
100
Forward Conduction
Parameter
SD3553C..R Units Conditions
I_F(AV)
Maximum average forward current
@ Heatsink temperature
I_F(RMS)
I_FSM
Maximum RMS forward current
Maximum peak, one-cycle forward,
non-repetitive surge current
I²t
Maximum I²t for fusing
I²âˆšt Maximum I²âˆšt for fusing
V_F(TO)1 Low level value of threshold voltage
V_F(TO)2 High level value of threshold voltage
r_f1
Low level value of forward slope resistance
r_f2
High level value of forward slope resistance
V_FM Maximum forward voltage drop
3500 (1690)
55 (85)
6540
47.0
50.0
40.2
42.6
11045
10375
8080
7531
110450
1.082
0.160
1.174
0.152
2.04
A 180° conduction, half sine wave
°C Double side (single side) cooled
A @ 25°C heatsink temp. double side cooled
KA t = 10ms No voltage
t = 8.3ms reapplied
t = 10ms 100% V_RRM
t = 8.3ms reapplied Sinusoidal half wave,
KA²s t = 10ms No voltage Initial T_J = T_J max.
t = 8.3ms reapplied
t = 10ms 50% V_RRM
t = 8.3ms reapplied
KA²âˆšs t = 0.1 to 10ms, no voltage reapplied
V (16.7% x π x I_F(AV) < I < π x I_F(AV)), T_J = T_J max.
(π x I_F(AV) < I < 20 x π x I_F(AV)), T_J = T_J max.
mΩ (16.7% x π x I_F(AV) < I < π x I_F(AV)), T_J = T_J max.
(π x I_F(AV) < I < 20 x π x I_F(AV)), T_J = T_J max.
V T_J = 150°C, I_FM = 6000A
Recovery Characteristics
Code
T_J = 25°C
Typical T_rr
Test Conditions
Max. values @ T_J = 150°C
I_pk
di/dt V_r
IFM
t_rr
Q_rr
I_rr
@ 25% I_RRM Square Pulse
@ 25% I_RRM
(µs)
S20
2.0
(A)
1000
(A/µs) (V)
60 -50
(µs)
(µC) (A)
di
dt
5.50
1000 200
t_rr
t
Q_rr
I_RM (REC)
Preliminary Data Sheets I2098
2