English
Language : 

MBRS130TRPBF Datasheet, PDF (2/6 Pages) International Rectifier – SCHOTTKY RECTIFIER
MBRS130TRPbF
Bulletin PD-20436 07/04
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
MBRS130TRPbF
30
Absolute Maximum Ratings
Parameters
Value Units Conditions
IF(AV) Max. Average Forward Current
1.0
A 50% duty cycle @ TL = 147 °C, rectangular wave form
IFSM Max. Peak One Cycle Non-Repetitive
870
A 5µs Sine or 3µs Rect. pulse
Following any rated
load condition and
Surge Current, TJ = 25°C
50
10ms Sine or 6ms Rect. pulse with rated VRRM applied
EAS Non- Repetitive Avalanche Energy
3.0
mJ TJ = 25 °C, IAS = 1A, L = 6mH
IAR Repetitive Avalanche Current
1.0
A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. Va = 1.5 x Vr typical
Electrical Specifications
Parameters
Value Units
Conditions
VFM Max. Forward Voltage Drop (1)
IRM Max. Reverse Leakage Current (1)
0.6
0.67
0.42
0.52
0.5
5.0
15
CT Max. Junction Capacitance
LS Typical Series Inductance
dv/dt Max. Voltage Rate of Change
(Rated VR)
(1) Pulse Width < 300µs, Duty Cycle < 2%
200
2.0
10000
Thermal-Mechanical Specifications
V @ 1A
V @ 2A
TJ = 25 °C
V @ 1A
V @ 2A
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 100 °C
mA TJ = 125 °C
VR = rated VR
pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25°C
nH Measured lead to lead 5mm from package body
V/µs
Parameters
Value Units
Conditions
TJ Max. Junction Temperature Range (*) -55 to125
Tstg Max. Storage Temperature Range
- 55 to 150
RthJL
Max. Thermal Resistance
Junction to Lead
25
(**)
RthJA Max. Thermal Resistance
80
Junction to Ambient
°C
°C
°C/W
°C/W
DC operation
DC operation
wt Approximate Weight
0.10(0.003) g (oz.)
Case Style
SMB
Similar to DO-214AA
Device Marking
IR13
(*)
dPtot
dTj
<
1
Rth (j-a)
thermal runaway condition for a diode on its own heatsink
(**) Mounted 1 inch square PCB
2
www.irf.com