MBRS120 Datasheet, PDF (2/6 Pages) International Rectifier – SCHOTTKY RECTIFIER 1 Amp

MBRS120
Bulletin PD-20644 rev. D 03/03
Voltage Ratings
Part number
V_R Max. DC Reverse Voltage (V)
V_RWM Max. Working Peak Reverse Voltage (V)
MBRS120
20
Absolute Maximum Ratings
Parameters
Value Units Conditions
I_F(AV) Max. Average Forward Current
1.0
I_FSM Max. Peak One Cycle Non-Repetitive 310
Surge Current
40
E_AS Non Repetitive Avalanche Energy
2.0
I_AR Repetitive Avalanche Current
0.8
Electrical Specifications
A 50% duty cycle @ T_L = 138°C, rectangular wave form
5µs Sine or 3µs Rect. pulse Following any rated
load condition and
10ms Sine or 6ms Rect. pulse with rated V_RRMapplied
mJ T_J = 25 °C, I_AS = 1A, L = 4mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by T_J max. Va = 1.5 x Vr typical
Parameters
Typ. Max. Units Conditions
V_FM Max. Forward Voltage Drop (1)
I_RM Max. Reverse Leakage Current (1)
C_T Typical Junction Capacitance
0.42
0.46
0.33
0.39
0.30
0.36
0.015
2.0
7.0
110
L_S Typical Series Inductance
2.0
dv/dt Max. Voltage Rate of Change
-
(1) Pulse Width < 300µs, Duty Cycle < 2%
Thermal-Mechanical Specifications
0.45
0.52
0.37
0.45
0.35
0.43
0.2
6.0
20
-
-
10000
V @ 1A
V @ 2A
T_J = 25 °C
V @ 1A
V @ 2A
T_J = 100 °C
V @ 1A
V @ 2A
T_J = 125 °C
mA T _J = 25 °C
mA T_J = 100 °C
mA T_J = 125 °C
V_R = rated V_R
pF V_R = 5V_DC (test signal range 100kHz to
1Mhz), @ 25°C
nH Measured lead to lead 5mm from package body
V/ µs (Rated V_R)
Parameters
Value Units
Conditions
T_J Max.Junction Temperature Range (*) - 65 to 150 °C
T_stg Max. Storage Temperature Range - 65 to 150 °C
R_thJL Max. Thermal Resistance Junction
30
to Lead
(**)
°C/W DC operation
R_thJA Max. Thermal Resistance Junction
to Ambient
80 °C/W
Wt Approximate Weight
0.10(0.003) gr (oz)
Case Style
SMB
Similar DO-214AA
Device Marking
IR12
(*) dPtot
1
<
thermal runaway condition for a diode on its own heatsink
dTj Rth( j-a)
(**) Mounted 1 inch square PCB
2
www.irf.com