JANTX2N6851_15 Datasheet, PDF (2/7 Pages) International Rectifier – Repetitive Avalanche Ratings

IRFF9230
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Min Typ Max Units
-200 — — V
— -0.22 — V/°C
— — 0.80
—
— 1.68 ^Ω
-2.0 — -4.0 V
2.2 — — S
— — -25
— — -250 µA
— — -100
— — 100 nA
14.7 — 34.8
0.8 — 7.0 nC
5.0 — 17
— — 50
— — 100
—
— 100 ^ns
— — 80
— 7.0 — _nH
— 700
— 200 — pF
— 40 —
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
VGS = -10V, ID = -2.4A „
VGS = -10V, ID = -4.0A „
VDS = VGS, ID = -250µA
VDS = -15V, IDS = -2.4A „
VDS = -160V, VGS = 0V
VDS = -160V
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS = -10V, ID = -4.0A
VDS= -100V
VDD = -100V, ID = -4.0A,
VGS = -10V,RG = 7.5Ω
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
Continuous Source Current (Body Diode) — — -4.0 _A
ISM Pulse Source Current (Body Diode) 
— — -20
VSD Diode Forward Voltage
— — -6.0 V
Tj = 25°C, IS = -4.0A, VGS = 0V „
trr Reverse Recovery Time
— — 400 ns Tj = 25°C, IF = -4.0A, di/dt ≤ -100A/µs
QRR Reverse Recovery Charge
— — 4.0 µC
VDD ≤ -50V „
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max Units
— — 5.0
— — 175 ^°C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com