JANTX2N6806_15 Datasheet, PDF (2/7 Pages) International Rectifier – Repetitive Avalanche Ratings

IRF9230
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Min Typ Max Units
Test Conditions
-200 — — V
VGS = 0V, ID = -1.0mA
— -0.20 — V/°C Reference to 25°C, ID = -1.0mA
— — 0.80
—
— 0.92 ^Ω
-2.0 — -4.0 V
2.0 — — S ( )
— — -25
— — -250 ^µA
—
— -100 _nA
— — 100
VGS =-10V, ID =-4.0A➃
VGS =-10V, ID =-6.5A ➃
VDS = VGS, ID =-250µA
VDS >-15V, IDS =-4.0A➃
VDS=-160V, VGS=0V
VDS =-160V
VGS = 0V, TJ = 125°C
VGS =-20V
VGS =-20V
— — 31
— — 7.0 nC
— — 17
VGS =-10V, ID=-6.5A
VDS =-100V
— — 50
— — 100
ns
— — 100
VDD =-100V, ID =-6.5A,
RG =7.5Ω
— — 80
— 6.1 — nH _{Measured from the center of}
drain pad to center of source
pad
— 700
— 200 — pF
— 40 —
VGS = 0V, VDS =25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — -6.5 _A
— — -28
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
— — -6.0 V
— — 400 nS
— — 4.0 µc
Tj = 25°C, IS =-6.5A, VGS = 0V ➃
Tj = 25°C, IF =-6.5A, di/dt ≤-100A/µs
VDD ≤-50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction to Case
Junction-to-Ambient
For footnotes refer to the last page
2
Min Typ Max Units
— — 1.67 _°C/W
— — 30
Test Conditions
Soldered to a 2” square copper-clad board
www.irf.com