JANTX2N6804_15 Datasheet, PDF (2/7 Pages) International Rectifier – Repetitive Avalanche Ratings

IRF9130
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Min Typ Max Units
-100 — — V
— -0.087 — V/°C
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
— — 0.30
—
— 0.35 ^Ω
-2.0 — -4.0 V
3
— — S( )
— — -25
— — -250 ^µA
—
— -100 _nA
— — 100
VGS =-10V, ID =-7.0A➃
VGS =-10V, ID =-11A ➃
VDS = VGS, ID =-250µA
VDS >-15V, IDS =-7.0A➃
VDS=-80V, VGS=0V
VDS =-80V
VGS = 0V, TJ = 125°C
VGS =-20V
VGS =-20V
— — 29
— — 7.1 nC
— — 21
VGS =-10V, ID=-11A
VDS =-50V
— — 60
— — 140
ns
— — 140
VDD =-50V, ID =-11A,
RG =7.5Ω
— — 140
— 6.1 — nH _{Measured from the center of}
drain pad to center of source
pad
— 860
— 350 — pF
— 125 —
VGS = 0V, VDS =25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — -11 _A
— — -50
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
— — -4.7 V
— — 250 nS
— — 3.0 µc
Tj = 25°C, IS =-11A, VGS = 0V ➃
Tj = 25°C, IF =-11A, di/dt ≤-100A/µs
VDD ≤-50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction to Case
Junction-to-Ambient
For footnotes refer to the last page
2
Min Typ Max Units
— — 1.67 _°C/W
— — 30
Test Conditions
soldered to a 2” square copper-clad board
www.irf.com