IRHNJ67234 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET SURFACE-MOUNT (SMD-0.5)

IRHNJ67234
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 250
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
VGS(th)
Gate Threshold Voltage
2.0
gfs
Forward Transconductance
8.8
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Typ Max Units
—— V
0.24 — V/°C
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
— 0.21 Ω
VGS = 12V, ID = 7.8A _Ã
— 4.0 V
— — S( )
—
—
10
25
µA
— 100
— -100 ^nA
— 40
— 14 nC
— 11
VDS = VGS, ID = 1.0mA
VDS = 15V, IDS = 7.8A Ã
VDS = 200V ,VGS=0V
VDS = 200V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS = 12V, ID = 12.4A
VDS = 125V
— 18
— 31
— 38 ^ns
VDD = 125V, ID = 12.4A,
VGS = 12V, RG = 7.5Ω
— 27
4.0 — _{nH Measured from the center of}
drain pad to center of source pad
Ciss
Coss
Crss
Rg
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Internal Gate Resistance
— 1445 —
— 187 — pF
— 2.4 —
— 1.2 —
Ω
VGS = 0V, VDS = 25V
f = 1.0MHz
f = 1.0MHz, open drain
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
Continuous Source Current (Body Diode) — — 12.4 _A
ISM Pulse Source Current (Body Diode) À
— — 49.6
VSD Diode Forward Voltage
— — 1.2 V
Tj = 25°C, IS = 12.4A, VGS = 0V Ã
trr Reverse Recovery Time
— — 654 ns Tj = 25°C, IF = 12.4A, di/dt ≤ 100A/µs
QRR Reverse Recovery Charge
— — 5.15 µC
VDD ≤ 50V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
Junction-to-Case
Min Typ Max Units
— — 1.67 °C/W
Test Conditions
Note: Corresponding Spice and Saber models are available on International Rectifier Web site.
For footnotes refer to the last page
2
www.irf.com