IRHNJ57Z30 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET SURFACE MOUNT (SMD-0.5)

IRHNJ57Z30
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min Typ Max Units
Test Conditions
BVDSS
Drain-to-Source Breakdown Voltage
30 — —
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — 0.028 —
Voltage
V
VGS = 0V, ID = 1.0mA
V/°C Reference to 25°C, ID = 1.0mA
RDS(on)
Static Drain-to-Source On-State
Resistance
— — 0.02 Ω
VGS = 12V, ID = 22A _➃
VGS(th)
gfs
IDSS
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
2.0 — 4.0 V
16 — — S ( )
—
—
—
—
10
25
µA
— — 100
—
— -100 ^nA
— — 65
— — 20 nC
— — 10
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 22A ➃
VDS= 24V ,VGS=0V
VDS = 24V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 22A
VDS = 15V
— — 25
— — 100
—
— 35
ns
VDD = 15V, ID = 22A,
VGS =12V, RG = 7.5Ω
— — 30
— 4.0 — _{nH Measured from the center of}
drain pad to center of source pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 2054 —
— 936 — pF
— 33 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
ISM
VSD
trr
QRR
ton
Continuous Source Current (Body Diode) — — 22* _A
Pulse Source Current (Body Diode) ➀
— — 88
Diode Forward Voltage
— — 1.2 V
Reverse Recovery Time
— — 102 ns
Reverse Recovery Charge
— — 193 nC
Tj = 25°C, IS = 22A, VGS = 0V ➃
Tj = 25°C, IF = 22A, di/dt ≤ 100A/µs
VDD ≤ 25V ➃
Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by internal wire diameter
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction-to-Case
Junction-to-PC board
Min Typ Max Units
Test Conditions
— — 1.67
°C/W
— 6.9 —
soldered to a 2” square copper-clad board
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com