IRHMS67164_15 Datasheet, PDF (2/9 Pages) International Rectifier – Simple Drive Requirements

IRHMS67164, 2N7582T1
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Pre-Irradiation
Parameter
Min Typ Max Units
Test Conditions
BVDSS
Drain-to-Source Breakdown Voltage 150 — —
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — 0.18 —
Voltage
V
VGS = 0V, ID = 1.0mA
V/°C Reference to 25°C, ID = 1.0mA
RDS(on)
Static Drain-to-Source On-State
Resistance
— — 0.019 Ω
VGS = 12V, ID = 44A Ã
VGS(th)
Gate Threshold Voltage
∆VGS(th)/∆TJ ^{Gate Threshold Voltage Coefficient}
gfs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
2.0 — 4.0 V
— -10.92 — mV/°C
VDS = VGS, ID = 1.0mA
49 — — S
VDS = 15V, IDS = 44A Ã
— — 10
— — 25 µA
VDS= 120V, VGS = 0V
VDS = 120V,
VGS = 0V, TJ = 125°C
—
— 100 _nA
— — -100
— — 230
VGS = 20V
VGS = -20V
VGS = 12V, ID = 45A
— — 55 nC
VDS = 75V
— — 90
— — 35
—
— 120 _ns
— — 85
VDD = 75V, ID = 45A,
VGS = 12V, RG = 2.35Ω
— — 25
— 6.8 — nH Measured from Drain lead
( 6mm / 0.025 in from package )
to Source lead ( 6mm/ 0.025 in
from package )
Ciss
Coss
Crss
Rg
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Gate Resistance
— 7380 —
— 1140 — pF
— 28 —
0.52
Ω
VGS = 0V, VDS = 25V
f = 1.0MHz
f = 1.0MHz, open drain
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
Continuous Source Current (Body Diode) — — 45*
A
ISM Pulse Source Current (Body Diode) À
— — 180
VSD Diode Forward Voltage
— — 1.2 V
trr Reverse Recovery Time
— — 370 ns
QRR Reverse Recovery Charge
— — 3.8 µC
Tj = 25°C, IS = 45A, VGS = 0V Ã
Tj = 25°C, IF = 45A, di/dt ≤ 100A/µs
VDD ≤ 25V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
Min Typ Max Units
Test Conditions
RthJC
RthCS
RthJA
Junction-to-Case
Case-to-Sink
Junction-to-Ambient
— — 0.60
— 0.21 —
— — 48
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Web site.
For footnotes refer to the last page
2
www.irf.com