IRHM7054 Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET THRU-HOLE (TO-254AA)

IRHM7054, JANSR2N7394
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Pre-Irradiation
Parameter
Min Typ Max Units
Test Conditions
BVDSS
Drain-to-Source Breakdown Voltage 60 — —
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — 0.053 —
Voltage
V
VGS = 0V, ID = 1.0mA
V/°C Reference to 25°C, ID = 1.0mA
RDS(on)
VGS(th)
gfs
IDSS
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
— — 0.027 Ω
— — 0.030
VGS = 12V, ID = 30A _Ã
VGS = 12V, ID = 35A
2.0 — 4.0 V
12 — — S ( )
—
— 25 _µA
— — 250
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 30A Ã
VDS= 48V ,VGS=0V
VDS = 48V,
—
— 100 _nA
— — -100
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
— — 200
— — 60 nC
VGS =12V, ID = 35A
VDS = 30V
— — 75
— — 27
—
— 100 _ns
— — 75
VDD =30V, ID = 35A
VGS =12V, RG = 2.35Ω
— — 75
—
6.8 —
nH ^{Measured from Drain lead (6mm /0.25in from}
package) to Source lead (6mm /0.25in. from
Package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 4100 —
— 2000 — pF
— 560 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS
ISM
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) À
—
—
—
—
35*
140
A
VSD Diode Forward Voltage
— — 1.4 V
trr Reverse Recovery Time
— — 280 nS
QRR Reverse Recovery Charge
— — 2.2 µC
Tj = 25°C, IS = 35A, VGS = 0V Ã
Tj = 25°C, IF = 35A, di/dt ≤ 100A/µs
VDD ≤ 50V Ã
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
Min Typ Max Units
Test Conditions
RthJC
RthJA
RthCS
Junction-to-Case
Junction-to-Ambient
Case-to-Sink
— — 0.83
— — 48
— 0.21 —
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com