IRH7230 Datasheet, PDF (2/12 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET THRU-HORE (TO-204AA/AE)

IRH7230
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Pre-Irradiation
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 200
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
—
VGS(th)
Gate Threshold Voltage
2.0
gfs
Forward Transconductance
3.3
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Ciss
Input Capacitance
—
Coss
Output Capacitance
—
Crss
Reverse Transfer Capacitance
—
Typ Max Units
—— V
0.27 — V/°C
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
— 0.40
— 0.49
— 4.0
——
— 25
— 250
— 100
— -100
— 50
— 10
— 20
— 35
— 80
— 60
— 46
10 —
1100 —
250 —
65 —
Ω
V
S( )
µA
nA
nC
ns
VGS = 12V, ID =6.0A _➃
VGS = 12V, ID = 9.0A
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 6.0A ➃
VDS= 160V ,VGS=0V
VDS = 160V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID =9.0A
VDS = 100V
VDD = 100V, ID =9.0A
VGS =12V, RG = 7.5Ω
nH ^{Measured from Drain lead (6mm /0.25in.}
from package) to Source lead (6mm /25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
VGS = 0V, VDS = 25V
pF
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
—
—
—
—
9.0
36
A
VSD Diode Forward Voltage
— — 1.6 V
trr Reverse Recovery Time
— — 460 nS
QRR Reverse Recovery Charge
— — 5.0 µC
Tj = 25°C, IS = 9.0A, VGS = 0V ➃
Tj = 25°C, IF = 9.0A, di/dt ≤ 100A/µs
VDD ≤ 50V ➃
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
RthCS
Junction-to-Case
Junction-to-Ambient
Case-to-Sink
Min Typ Max
— — 1.67
— — 30
— 0.12 —
Units
°C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com