IRFAG50_15 Datasheet, PDF (2/7 Pages) International Rectifier – Simple Drive Requirements

IRFAG50
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
*Equipment Limitation
Min
1000
—
—
—
2.0
5.2
—
—
—
—
88
8.8
48
—
—
—
—
—
—
—
—
Typ Max Units
—— V
1.4 — V/°C
— 2.0
— 2.3
Ω
— 4.0 V
— — S( )
— 25
— 250 ^µA
— 100 _nA
— -100
— 200
— 20 nC
— 110
— 30
— 44
ns
— 210
— 60
6.1 — nH
2400
240 — pF
80 —
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
VGS =10V, ID =3.5A➃
VGS = 10V, ID =5.6A ➃
VDS = VGS, ID =250mA
VDS > 15V, IDS =3.5A ➃
VDS=800V, VGS=0V
VDS =800V
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS= 10V, ID=5.6A
VDS =500V
VDD =400V*, ID =5.6A,
RG =2.35Ω
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — 5.6 _A
— — 22
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
— — 1.8 V
— — 1200 nS
— — 8.4 µC
Tj = 25°C, IS =5.6A, VGS = 0V ➃
Tj = 25°C, IF =5.6A, di/dt ≤ 100A/µs
VDD ≤ 50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction to Case
Junction to Ambient
For footnotes refer to the last page
2
Min Typ Max Units
— — 0.83
°C/W
— — 30
Test Conditions
Typical socket mount
www.irf.com