IRFAG40_15 Datasheet, PDF (2/7 Pages) International Rectifier – Simple Drive Requirements

IRFAG40
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Ciss
Coss
Crss
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min
1000
—
—
—
2.0
3.3
—
—
—
—
53
5.3
29
—
—
—
—
—
—
—
—
Typ Max Units
—— V
1.4 — V/°C
— 3.5
— 4.0
Ω
— 4.0 V
— — S( )
— 25
— 250 ^µA
— 100 _nA
— -100
— 120
— 12 nC
— 66
— 30
— 50
ns
— 170
— 50
6.1 — nH
1700
250 — pF
100 —
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
VGS = 10V, ID =2.5A ➃
VGS = 10V, ID =3.9A ➃
VDS = VGS, ID =250µA
VDS > 15V, IDS =2.5A ➃
VDS=800V, VGS=0V
VDS = 800V
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS= 10V, ID=3.9A
VDS =500V
VDD =400V*, ID =3.9A,
RG =9.1Ω
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
VGS = 0V, VDS = 25V
f = 1.0MHz
*Equipment Limitation
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — 3.9 _A
— — 16
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
— — 1.8 V
— — 1000 nS
— — 5.6 µC
Tj = 25°C, IS =3.9A, VGS = 0V ➃
Tj = 25°C, IF =3.9A, di/dt ≤ 100A/µs
VDD ≤ 50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction to Case
Junction to Ambient
For footnotes refer to the last page
2
Min Typ Max Units
— — 1.0
°C/W
— — 30
Test Conditions
Typical socket mount
www.irf.com