IRF9321PBF_15 Datasheet, PDF (2/8 Pages) International Rectifier – Industry-Standard SO-8 Package

IRF9321PbF
Static @ T_J = 25°C (unless otherwise specified)
Parameter
Min.
BV_DSS
Drain-to-Source Breakdown Voltage
-30
∆ΒV_DSS/∆T_J
Breakdown Voltage Temp. Coefficient
–––
R_DS(on)
Static Drain-to-Source On-Resistance
–––
–––
V_GS(th)
Gate Threshold Voltage
-1.3
∆V_GS(th)
Gate Threshold Voltage Coefficient
–––
I_DSS
Drain-to-Source Leakage Current
–––
–––
I_GSS
Gate-to-Source Forward Leakage
–––
Gate-to-Source Reverse Leakage
–––
gfs
Forward Transconductance
30
Q_g
h Total Gate Charge
–––
Q_g
h Total Gate Charge
–––
Q_gs
h Gate-to-Source Charge
–––
Q_gd
h Gate-to-Drain Charge
–––
R_G
h Gate Resistance
–––
t_d(on)
Turn-On Delay Time
–––
t_r
Rise Time
–––
t_d(off)
Turn-Off Delay Time
–––
t_f
Fall Time
–––
C_iss
Input Capacitance
–––
C_oss
Output Capacitance
–––
C_rss
Reverse Transfer Capacitance
–––
Avalanche Characteristics
Parameter
E_AS
d Single Pulse Avalanche Energy
I_AR
™ Avalanche Current
Diode Characteristics
Parameter
Min.
I_S
Continuous Source Current
–––
(Body Diode)
I_SM
Pulsed Source Current
Ù (Body Diode)
–––
V_SD
Diode Forward Voltage
–––
t_rr
Reverse Recovery Time
–––
Q_rr
Reverse Recovery Charge
–––
Thermal Resistance
Parameter
R_θJL
R_θJA
g Junction-to-Drain Lead
f Junction-to-Ambient
Typ.
–––
0.021
5.9
9.3
-1.8
-5.9
–––
–––
–––
–––
–––
34
65
10
16
18
21
79
185
145
2590
590
360
Typ.
–––
–––
–––
38
24
Max.
–––
–––
7.2
11.2
-2.4
–––
-1.0
-150
-100
100
–––
–––
98
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Units
Conditions
V VGS = 0V, ID = -250µA
V/°C
mΩ
Reference to 25°C, I_D = -1mA
e V_GS = -10V, I_D = -15A
e V_GS = -4.5V, I_D = -12A
V VDS = VGS, ID = -50µA
mV/°C
µA ^{VDS = -24V, VGS = 0V}
V_DS = -24V, V_GS = 0V, T_J = 125°C
nA ^{VGS = -20V}
V_GS = 20V
S VDS = -10V, ID = -12A
nC VDS = -15V, VGS = -4.5V, ID = - 12A
V_GS = -10V
nC VDS = -15V
I_D = -12A
Ω
e V_DD = -30V, V_GS = -4.5V
ns ^{ID = -1.0A}
R_G = 6.8Ω
See Figs. 19a & 19b
V_GS = 0V
pF VDS = -25V
ƒ = 1.0MHz
Typ.
–––
–––
Max.
310
-12
Units
mJ
A
Max.
-2.5
-120
-1.2
57
36
Units
Conditions
MOSFET symbol
D
showing the
A
integral reverse
G
p-n junction diode.
S
e V T_J = 25°C, I_S = -2.5A, V_GS = 0V
ns T_J = 25°C, I_F = -2.5A, VDD = -24V
e nC di/dt = 100/µs
Typ.
–––
–––
Max.
20
50
Units
°C/W
Notes:
 Repetitive rating; pulse width limited by max. junction temperature.
‚ Starting T_J = 25°C, L = 4.3mH, R_G = 25Ω, I_AS = -12A.
ƒ Pulse width ≤ 400µs; duty cycle ≤ 2%.
„ When mounted on 1 inch square copper board.
… R_θ is measured at T_J of approximately 90°C.
† For DESIGN AID ONLY, not subject to production testing.
2
www.irf.com