IRF9240_15 Datasheet, PDF (2/7 Pages) International Rectifier – Simple Drive Requirements

IRF9240
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min
-200
—
—
—
-2.0
4.0
—
—
—
—
28
3.0
4.5
—
—
—
—
—
—
—
—
Typ Max Units
—— V
-0.20 — V/°C
— 0.5 _Ω
— 0.58
— -4.0 V
— — S( )
— -25 _µA
— -250
— -100
— 100 ^nA
— 60
— 15 nC
— 38
— 35
— 85
— 85 ^{n s}
— 65
6.1 — _nH
1200
570 — pF
81 —
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
VGS = -10V, ID = -7.0A➃
VGS = -10V, ID = -11A ➃
VDS = VGS, ID = -250µA
VDS > -15V, IDS = -7.0A ➃
VDS=-160V, VGS=0V
VDS =-160V
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS =-10V, ID = -11A
VDS =-100V
VDD = -100V, ID = -11A,
RG = 9.1Ω
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — -11 _A
— — -44
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
— — -4.6 V
— 270 440 nS
— — 7.2 µC
Tj = 25°C, IS =-11A, VGS = 0V ➃
Tj = 25°C, IF = -11A, di/dt ≤ -100A/µs
VDD ≤ -50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
For footnotes refer to the last page
2
Min Typ Max Units
— — 1.0
°C/W
— — 30
Test Conditions
soldered to a 2” square copper-clad board
www.irf.com