IRF9140 Datasheet, PDF (2/7 Pages) Seme LAB – P-CHANNEL POWER MOSFET

IRF9140
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Min Typ Max Units
-100 — — V
— -0.087 — V/°C
— — 0.2
—
— 0.23
Ω
-2.0 — -4.0 V
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
VGS = -10V, ID = -11A ➃
VGS =-10V, ID = -18A ➃
VDS = VGS, ID = -250µA
gfs
IDSS
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Ciss
Coss
Crss
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
6.2 — — S ( )
— — -25
— — -250 µA
— — -100
— — 100 nA
31 — 60
3.7 — 13 nC
7.0 — 35.2
VDS > -15V, IDS = -11A ➃
VDS= -80V, VGS=0V
VDS = -80V
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS =-10V, ID = -18A
VDS= -50V
— — 35
—
— 85 ^{n s}
— — 85
VDD = -50V, ID = -18A,
RG =9.1Ω
—
—
65
nH
Measured from drain lead (6mm/0.25in. from
— 6.1 —
package) to source lead (6mm/0.25in. from
package)
— 1400
— 600 — pF
— 200 —
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — -18 _A
— — -72
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
— — -4.2 V
— 170 280 nS
— — 3.6 µC
Tj = 25°C, IS =-18A, VGS = 0V ➃
Tj = 25°C, IF = -18A, di/dt ≤ -100A/µs
VDD ≤ -50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max Units
— — 1.0
°C/W
— — 30
Test Conditions
Soldered to a 2” square copper-clad board
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com