IRF054_15 Datasheet, PDF (2/7 Pages) International Rectifier – Repetitive Avalanche Ratings

IRF054
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS ₊ LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Min Typ Max Units
Test Conditions
60 — — V
VGS = 0V, ID = 1.0mA
— 0.68 — V/°C Reference to 25°C, ID = 1.0mA
— — 0.022
—
— 0.025 ^Ω
2.0 — 4.0 V
20 — — S ( )
— — 25
— — 250 ^µA
— — 100
nA
— — -100
80 — 180
20 — 45 nC
34 — 105
VGS = 10V, ID = 31A ➃
VGS = 10V, ID =45A ➃
VDS = VGS, ID =250µA
VDS > 15V, IDS = 31A ➃
VDS= 48V,VGS=0V
VDS = 48V
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =10V, ID _=45A
VDS = 30V
— — 33
— — 180
—
— 100 ^{n s}
VDD =30V, ID =45A,
RG =2.35Ω
— — 100
—
6.1
—
nH
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
— 4600
— 2000 — pF
VGS = 0V, VDS = 25V
f = 1.0MHz
— 340 —
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — 45* _A
— — 220
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
*Current limited by pin diameter.
Thermal Resistance
Parameter
RthJC
RthJA
Junction to Case
Junction to Ambient
— — 2.5 V
— — 280 nS
— — 2.2 µC
Tj = 25°C, IS = 45A, VGS = 0V ➃
Tj = 25°C, IF = 45A, di/dt ≤ 100A/µs
VDD ≤ 50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Min Typ Max Units
— — 0.83
°C/W
— — 30
Test Conditions
Typical socket mount
For footnotes refer to the last page
2
www.irf.com