English
Language : 

ARF461 Datasheet, PDF (2/4 Pages) International Rectifier – ADVANCED ANALOG EMI FILTER HYBRID / HIGH RELIABILITY
ARF461 Series
Specifications
ABSOLUTE MAXIMUM RATINGS Note 1
Input Voltage
Input Current
Lead Soldering Temperature
Case Temperature
-80V to +80V Note 2
5.0 A
300°C for 10 seconds
Operating
Storage
-55°C to +125°C
-65°C to +135°C
Electrical Characteristics -55°C ≤ TCASE ≤ +125°C, -50 ≤ VIN ≤ +50 unless otherwise specified
Parameter
INPUT VOLTAGE
OUTPUT VOLTAGE
OUTPUT CURRENT Note 3
DC RESISTANCE Note 4
POWER DISSIPATION
NOISE REDUCTION
ISOLATION
CAPACITANCE
DEVICE WEIGHT
Group A
Subgroups
Test Conditions
Min Nom Max Unit
Steady State
Transient Note 2
-50
+50
-80
+80
VDC
1, 2, 3
VOUT = VIN - IIN (RDC)
1
TC = 25°C
Maximum Current
TC = 25°C
150 KHz - 50 MHz
VDC
4.0
ADC
240
mΩ
2.16
w
40
dB
1
Any Pin to Case
100
MΩ
Tested @ 500VDC
Measured Between Any Pin and Case
40
nF
Slight Variations with Case Style
95
gms
Notes to Specifications
1. Operation above maximum ratings may cause permanent damage to the device. Operation at maximum ratings may degrade
performance and affect reliability.
2.
Device can tolerate ± 100 Volt transient whose duration is
≤
100
ms
when
R
S
≥
0.5
Ω.
3. Derate Output Current linearly from 100% at 125°C to 0 at 135°C.
4. DC resistance is the total resistance of the device and includes the sum of the input to output resistance and the return in to return
out resistance paths.
2
www.irf.com