AMH461_15 Datasheet, PDF (2/6 Pages) International Rectifier – EMI FILTER HYBRID / HIGH RELIABILITY

AMH461 Series
Specifications
ABSOLUTE MAXIMUM RATINGS Note 1
Input Voltage
-80V to +80V Note 2
Input Current
2.0 A
Power Dissipation
2.0 W
Lead Soldering Temperature
300°C for 10 seconds
Case Temperature
Operating
Storage
-55°C to +125°C
-65°C to +135°C
Electrical Characteristics -55°C ≤ TCASE ≤ +125°C, 0 ≤ VIN ≤ +50 unless otherwise specified
Parameter
INPUT VOLTAGE
OUTPUT CURRENT Note 3
DC RESISTANCE Note 4
POWER DISSIPATION
NOISE REDUCTION
Group A
Subgroups
Test Conditions
1, 2, 3
I_IN ≤ 500µ A
Transient Note 2
1
4, 5, 6
TC = 25°C
Maximum Current
TC = 25°C
TC = 25°C
1KHz
200 KHz - 500 KHz
500 KHz - 10 MHz
Min Nom Max Unit
0
+40
VDC
-50
+50
2.0
ADC
150
250
mΩ
1.0
W
-1.0
+1.0
40
50
dB
60
80
ISOLATION
CAPACITANCE
DEVICE WEIGHT
1
Any Pin to Case
100
Tested @ 500VDC
1, 2, 3 Measured Between Any Pin and Case
30
44
Slight Variations with Case Style
30
MΩ
46
nF
g
Notes to Specifications
1. Operation above maximum ratings may cause permanent damage to the device. Operation at maximum ratings may degrade
performance and affect reliability.
2.
Device can tolerate ± 100 Volt transient whose duration is
≤
100
ms
when
R
S
≥
0.5
Ω.
3. Derate Output Current linearly from 100% at 125°C to 0 at 135°C.
4. DC resistance is the total resistance of the device and includes the sum of the input to output resistance and the return in to return
out resistance paths.
2
www.irf.com