63CTQ100 Datasheet, PDF (2/6 Pages) International Rectifier – SCHOTTKY RECTIFIER

63CTQ100
Bulletin PD-20635 rev. A 12/01
Voltage Ratings
Parameters
63CTQ100
V_R Max. DC Reverse Voltage (V)
V_RWM Max. Working Peak Reverse Voltage (V)
100
Absolute Maximum Ratings
Parameters
I_F(AV) Max. Average Forward (PerLeg)
Current
(Per Device)
I_FRM Peak Repetitive Forward
Current
(Per Leg)
I_FSM Max.PeakOneCycleNon-Repetitive
Surge Current
(Per Leg)
E_AS
Non -Repetitive Avalanche Energy
(Per Leg)
I_AR Repetitive Avalanche Current
(Per Leg)
Values
30
60
60
1500
300
11.25
0.75
Units Conditions
A 50% duty cycle @ T_C = 139°C, rectangular wave form
A Rated V_R, square wave, 20kHz
T_C = 140° C
A
5µs Sine or 3µs Rect. pulse
10ms Sine or 6ms Rect. pulse
Following any rated load
condition and with rated
V_RRM applied
mJ T_J = 25°C, I_AS = 0.75Amps, L = 40mH
A Current decaying linearty to zero in 1 µsec
Frequency limited by T_J max. V_A = 1.5 x V_R typical
Electrical Specifications
Parameters
Typ. Max. Units Conditions
V_FM Max. Forward Voltage Drop
(1)
I_RM Max. Instantaneus Reverse Current
C_T Max. Junction Capacitance
L_S Typical Series Inductance
dv/dt Max. Voltage Rate of Change
(Rated V_R)
(1) Pulse Width < 300µs, Duty Cycle <2%
0.78 0.82
0.94 1.0
0.64 0.69
0.78 0.83
0.02 0.3
11 20
1100
8.0
10000
V
V
V
V
mA
mA
pF
nH
V/ µs
@ 30A
T_J = 25 °C
@ 60A
@ 30A
@ 60A
T_J = 125 °C
T_J = 25 °C Rated DC voltage
T_J = 125 °C
V_R = 5V_DC (test signal range 100Khz to 1Mhz) 25°C
Measured from top of terminal to mounting plane
Thermal-Mechanical Specifications
Parameters
Values
T_J Max. Junction Temperature Range
T_stg Max. Storage Temperature Range
R_thJC Max. Thermal Resistance
Junction to Case (Per Leg)
R_thCS Typical Thermal Resistance
Case to Heatsink
wt Approximate Weight
T Mounting Torque
Min.
Max.
-65 to 175
-65 to 175
1.2
0.50
2 (0.07)
6 (5)
12 (10)
Units Conditions
°C
°C
°C/W
DC operation
°C/W Mounting surface, smooth and greased
g (oz.)
Kg-cm Non-lubricated threads
(Ibf-in)
2
www.irf.com