60MT80KB Datasheet, PDF (2/7 Pages) International Rectifier – THREE PHASE BRIDGE

60-70MT..KB Series
Bulletin I27500 rev. A 05/03
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Voltage
Type number Code
V_RRM , maximum repetitive
peak reverse voltage
V
80
800
100
1000
60-70MT..KB
120
140
160
1200
1400
1600
V_RSM , maximum non-
repetitive peak rev. voltage
V
900
1100
1300
1500
1700
I_RRM max.
@ T_J max.
mA
10
Forward Conduction
Parameter
60MT.KB 70MT.KB Units Conditions
I_O Maximum DC output current
@ Case temperature
I_FSM Maximum peak, one-cycle forward,
non-repetitive surge current
I²t Maximum I²t for fusing
I²âˆšt Maximum I²âˆšt for fusing
V_F(TO)1 Low level value of threshold voltage
V_F(TO)2 High level value of threshold voltage
r_f1 Low level value of forward slope resistance
r_f2 High level value of forward slope resistance
V_FM Maximum forward voltage drop
V_INS RMS isolation voltage
60 (75)
85 (61)
420
440
350
370
870
790
610
560
8700
0.85
1.07
8.04
7.08
1.75
4000
70 (90)
85 (57)
480
500
400
420
1150
1050
800
730
11300
0.86
1.08
7.35
6.53
1.55
4000
A 120° Rect conduction angle
°C
A t = 10ms No voltage
t = 8.3ms reapplied
t = 10ms 100% V_RRM
t = 8.3ms reapplied Initial T_J = T_J max.
A²s t = 10ms No voltage
t = 8.3ms reapplied
t = 10ms 100% V_RRM
t = 8.3ms reapplied
A²âˆšs t = 0.1 to 10ms, no voltage reapplied
V (16.7% x π x I_F(AV) < I < π x I_F(AV)), @ T_J max.
(I > π x I_F(AV)), @ T_J max.
mΩ (16.7% x π x I_F(AV) < I < π x I_F(AV)), @ T_J max.
(I > π x I_F(AV)), @ T_J max.
V I_pk = 100A, T_J = 25°C, t_p = 400µs single junction
V T_J = 25°C, all terminal shorted
f = 50Hz, t = 1s
Thermal and Mechanical Specifications
Parameter
60MT.KC 70MT.KC Units Conditions
T_J Max. junction operating temperature range
T_stg Max. storage temperature range
R_thJC Max. thermal resistance, junction to case
R_thCS Max. thermal resistance, case to heatsink
T Mounting torque ± 10% to heatsink
to terminal
wt Approximate weight
-40 to 150
-40 to 150
0.37
0.29
2.22
1.75
0.40
0.34
2.42
2.01
0.03
4 to 6
3 to 4
176
°C
°C
K/W DC operation per module
DC operation per junction
120° Rect condunction angle per module
120° Rect condunction angle per junction
K/W Per module
Mounting surface smooth, flat and greased
Nm _{A mounting compound is recommended and}
the torque should be rechecked after a
period of 3 hours to allow for the spread of the
g compound. Lubricated threads.
2
www.irf.com