60HQ100 Datasheet, PDF (2/5 Pages) Microsemi Corporation – 60 AMP SCHOTTKY RECTIFIER

60HQ... Series
Bulletin PD-2.055 rev. E 11/02
Voltage Ratings
Part number
V_R Max. DC Reverse Voltage (V)
V_RWM Max. Working Peak Reverse Voltage (V)
60HQ060 60HQ080 60HQ090 60HQ100
60
80
90
100
Absolute Maximum Ratings
Parameters
60HQ Units
Conditions
I_F(AV) Max. Average Forward Current
* See Fig. 5
I_FSM Max. Peak One Cycle Non-Repetitive
Surge Current * See Fig. 7
E_AS Non-RepetitiveAvalancheEnergy
I_AR RepetitiveAvalancheCurrent
60
8400
1200
15
1
A 50% duty cycle @ T_C = 118 °C, rectangular wave form
5µs Sine or 3µs Rect. pulse ^{Following any rated}
A
load condition and
10ms Sine or 6ms Rect. pulse with rated V_RRM applied
mJ T_J = 25 °C, I_AS= 1 Amps, L = 30 mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by T_J max. V_A = 1.5 x V_R typical
Electrical Specifications
Parameters
V_FM Max. Forward Voltage Drop (1)
* See Fig. 1
I_RM Max. Reverse Leakage Current (1)
* See Fig. 2
C_T Max. Junction Capacitance
L_S Typical Series Inductance
dv/dt Max. Voltage Rate of Change
(Rated V_R)
(1) Pulse Width < 300µs, Duty Cycle < 2%
60HQ Units
Conditions
0.89
1.09
0.70
0.84
1.5
20
1400
7.5
10000
V
V
V
V
mA
mA
pF
nH
V/ µs
@ 60A
@ 120A
T_J = 25 °C
@ 60A
@ 120A
T_J = 125 °C
T_J = 25 °C
T_J = 125 °C
V_R = rated V_R
V_R = 5V_DC, (test signal range 100Khz to 1Mhz) 25 °C
Measured from top of terminal to mounting plane
Thermal-Mechanical Specifications
Parameters
60HQ Units
Conditions
T_J Max. Junction Temperature Range
T_stg Max. Storage Temperature Range
R_thJC Max. Thermal Resistance Junction
to Case
-65 to 175 °C
-65 to 175 °C
0.83 °C/W
DC operation
* See Fig. 4
R_thCS Typical Thermal Resistance, Case to
Heatsink
0.25
°C/W Mounting surface , smooth and greased
wt Approximate Weight
15 (0.53) g (oz.)
T MountingTorque
Min.
Max.
23 (20) _Kg-cm Non-lubricatedthreads
46 (40) ^(Ibf-in)
Case Style
DO-203AB(DO-5) JEDEC
2
www.irf.com