60CTTN015 Datasheet, PDF (2/5 Pages) International Rectifier – TRENCH SCHOTTKY RECTIFIER

60CTTN015
Bulletin PD-20489 rev. A 02/03
Voltage Ratings
Part number
V_R Max. DC Reverse Voltage (V) @ T_J = 150°C
60CTTN015
15
Absolute Maximum Ratings
Parameters
I_F(AV) Max.AverageForward (Per Leg)
Current
(Per Device)
I_FSM Max.PeakOneCycleNon-Repetitive
SurgeCurrent (Per Leg)
E_AS Non-RepetitiveAvalancheEnergy
(Per Leg)
I_AR RepetitiveAvalancheCurrent
(Per Leg)
Values
30
60
1800
340
9.0
2
Units
Conditions
A 50%duty cycle@T_C=130°C,rectangular wave form
5µs Sine or 3µs Rect. pulse Following any rated
A
10ms Sine or 6ms Rect. pulse
load condition and with
rated V_RRM applied
mJ T_J = 25 °C, I_AS = 2 Amps, L = 4.5 mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by T_J max. V_A = 1.5 x V_R typical
Electrical Specifications
Parameters
V_FM Max. Forward Voltage Drop
(Per Leg)
(1)
I_RM Max. Reverse Leakage Current
(Per Leg)
(1)
C_T Junction Capacitance (Per Leg)
L_S Series Inductance (Per Leg)
dv/dt Max. Voltage Rate of Change
(1) Pulse Width < 300µs, Duty Cycle < 2%
Typ
0.41
0.48
0.33
0.44
0.30
0.42
0.4
31
120
3000
8.0
-
Max Units Conditions
0.44
0.53
0.36
0.47
0.32
0.45
2
50
250
-
-
10000
V @ 30A
V @ 60A
T_J = 25°C
V @ 30A
V @ 60A
T_J = 125°C
V @ 30A
V @ 60A
T_J = 150°C
mA T_J = 25 °C V_R = rated V_R
mA T_J = 100°C
mA T_J = 125 °C
V_R = 5V
V_R = rated V_R
pF V_R=10V_DC(test signal range100KHz to1MHz) 25°C
nH Measured lead to lead 5mm from package body
V/µs (Rated V_R)
Thermal-Mechanical Specifications
Parameters
Values Units
Conditions
T_J Max.JunctionTemperatureRange
T_stg Max.StorageTemperatureRange
R_thJC Max.ThermalResistanceJunction
to Case (Per Leg)
R_thCS TypicalThermalResistance,Case
to Heatsink
wt ApproximateWeight
T MountingTorque
Min.
Max.
Case Style
-55 to150 °C
-55 to150 °C
1.2
°C/W DC operation
0.5 °C/W Mounting surface,smooth and greased
2(0.07) g(oz.)
6(5) Kg-cm
12(10) ^(Ibf-in)
TO-220AB
2
www.irf.com