245NQ015R Datasheet, PDF (2/4 Pages) International Rectifier – SCHOTTKY RECTIFIER

245NQ015
Bulletin PD-2.296 rev. B 02/01
Voltage Ratings
Part number
V_R Max. DC Reverse Voltage (V)
V_RWM Max. Working Peak Reverse Voltage (V)
Absolute Maximum Ratings
245NQ015
15
25
Parameters
245NQ Units
Conditions
I_F(AV) Max. Average Forward Current
* See Fig. 5
I_FSM Max. Peak One Cycle Non-Repetitive
Surge Current * See Fig. 7
E_AS Non-RepetitiveAvalancheEnergy
I_AR RepetitiveAvalancheCurrent
240
20,000
3000
9
2
A 50% duty cycle @ T_C = 70° C, rectangular wave form
5µs Sine or 3µs Rect. pulse ^{Following any rated}
A
load condition and
10ms Sine or 6ms Rect. pulse with rated V_RRM applied
mJ T_J = 25 °C, I_AS= 2 Amps, L = 4.5 mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by T_J max. V_A = 3 x V_R typical
Electrical Specifications
Parameters
245NQ Units
Conditions
V_FM Max. Forward Voltage Drop (1)
0.40
* See Fig. 1
0.51
V @ 240A
V @ 480A
T_J = 25 °C
0.34
V @ 240A
0.44
V @ 480A
T_J = 75 °C
I_RM Max. Reverse Leakage Current (1)
* See Fig. 2
80
4000
3560
2160
C_T Max. Junction Capacitance
L_S Typical Series Inductance
dv/dt Max. Voltage Rate of Change
(Rated V_R)
15,800
5.0
10,000
Thermal-Mechanical Specifications
mA
mA
mA
mA
pF
nH
V/ µs
T_J = 25 °C
T_J = 100 °C
V_R = rated V_R
T_J = 100 °C
V_R = 12V
T_J = 100 °C
V_R = 5V
V_R = 5V_DC, (test signal range 100Khz to 1Mhz) 25 °C
From top of terminal hole to mounting plane
(1) Pulse Width < 300µs, Duty Cycle < 2%
Parameters
245NQ Units
Conditions
T_J Max. Junction Temperature Range
T_stg Max. Storage Temperature Range
R_thJC Max. Thermal Resistance Junction
to Case
-55 to 125 °C
-55 to 150 °C
0.20 °C/W
DC operation
* See Fig. 4
R_thCS Typical Thermal Resistance, Case to
Heatsink
0.15
°C/W Mounting surface , smooth and greased
wt ApproximateWeight
25.6 (0.9) g (oz.)
T MountingTorque
Terminal Torque
Min.
Max.
Min.
Max.
40 (35)
58 (50)
58 (50)
86 (75)
Non-lubricated threads
Kg-cm
(Ibf-in)
Case Style
HALF PAK Module
2
www.irf.com