English
Language : 

20CTQ035 Datasheet, PDF (2/8 Pages) Microsemi Corporation – 20 AMP SCHOTTKY BARRIER RECTIFIERS
◁
20CTQ... Series
Bulletin PD-20056 rev. C 07/06
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
20CTQ035
35
20CTQ040
40
20CTQ045
45
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current
* See Fig. 5
IFSM Max. Peak One Cycle Non-Repetitive
Surge Current (Per Leg) * See Fig. 7
EAS Non-Repetitive Avalanche Energy
(Per Leg)
IAR Repetitive Avalanche Current
(Per Leg)
20CTQ Units
Conditions
20
A 50% duty cycle @ TC = 145°C, rectangular wave form
1060
265
13
A
5μs Sine or 3μs Rect. pulse
Following any rated
load condition and with
10ms Sine or 6ms Rect. pulse rated VRRM applied
mJ TJ = 25 °C, IAS = 2.0 Amps, L = 6.5 mH
2.0
A Current decaying linearly to zero in 1 μsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
20CTQ Units
Conditions
VFM Max. Forward Voltage Drop
(Per Leg) * See Fig. 1 (1)
IRM Max. Reverse Leakage Current
(Per Leg) * See Fig. 2 (1)
CT Max. Junction Capacitance(Per Leg)
LS Typical Series Inductance (Per Leg)
dv/dt Max. Voltage Rate of Change
(Rated VR)
0.64
0.76
0.57
0.68
2
15
900
8.0
10000
V @ 10A
V @ 20A
V @ 10A
V @ 20A
TJ = 25 °C
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 125 °C
VR = rated VR
pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
nH Measured lead to lead 5mm from package body
V/ μs
(1) Pulse Width < 300μs, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
TJ Max. Junction Temperature Range
Tstg Max. Storage Temperature Range
RthJC Max. Thermal Resistance Junction
to Case (Per Leg)
RthJC Max. Thermal Resistance Junction
to Case (Per Package)
RthCS Typical Thermal Resistance, Case
to Heatsink
wt Approximate Weight
T Mounting Torque
Min.
Max.
20CTQ Units
Conditions
-55 to 175 °C
-55 to 175 °C
3.25 °C/W DC operation * See Fig. 4
1.63 °C/W DC operation
0.50 °C/W Mounting surface , smooth and greased
2 (0.07)
6 (5)
12 (10)
g (oz.)
Kg-cm
(Ibf-in)
2
www.irf.com
 ▷