IRF1010ZSPBF_15 Datasheet, PDF (12/12 Pages) International Rectifier – Advanced Process Technology

IRF1010Z/S/LPbF
D²Pak Tape & Reel Information
Dimensions are shown in millimeters (inches)
TRR
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
FEED DIRECTION 1.85 (.073)
1.65 (.065)
TRL
10.90 (.429)
10.70 (.421)
1.60 (.063)
1.50 (.059)
11.60 (.457)
11.40 (.449)
15.42 (.609)
15.22 (.601)
1.75 (.069)
1.25 (.049)
16.10 (.634)
15.90 (.626)
0.368 (.0145)
0.342 (.0135)
24.30 (.957)
23.90 (.941)
4.72 (.136)
4.52 (.178)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
60.00 (2.362)
MIN.
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
26.40 (1.039)
24.40 (.961)
3
30.40 (1.197)
MAX.
4
TO-220AB package is not recommended for Surface Mount Application.
Notes:
 Repetitive rating; pulse width limited by
… Limited by T_Jmax , see Fig.12a, 12b, 15, 16 for typical repetitive
max. junction temperature. (See fig. 11).
avalanche performance.
‚ Limited by T_Jmax, starting T_J = 25°C, L = 0.05mH _{† This value determined from sample failure population. 100%}
R_G = 25Ω, I_AS = 75A, V_GS =10V. Part not
tested to this value in production.
recommended for use above this value.
ƒ Pulse width ≤ 1.0ms; duty cycle ≤ 2%.
„ C_oss eff. is a fixed capacitance that gives the
same charging time as C_oss while V_DS is rising
from 0 to 80% V_DSS .
‡ This is only applied to TO-220AB pakcage.
ˆ This is applied to D²Pak, when mounted on 1" square PCB (FR-
4 or G-10 Material). For recommended footprint and soldering
techniques refer to application note #AN-994.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: [phone]
TAC Fax: [phone]
Visit us at www.irf.com for sales contact information. 07/2010
12
www.irf.com